In order to put a gooseneck hitch on your 2020 Ram 4500 you'll need to use a gooseneck hitch designed specifically for that purpose, like the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs # BWGNRK1500. This gooseneck hitch is designed specifically for flat bed trucks and is backed by the lifetime warranty that B&W offers on their hitches, so you know you're getting the highest quality hitch available. view full answer...
I have a solution for you, but the B&W Ball and Safety Chain Kit for Ford, GM, and Nissan Titan Underbed Gooseneck Trailer Hitch # BWGNXA2061 is not a fit for the Ram factory gooseneck hitch. Instead, you can use the Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K # C60618 for a factory gooseneck hitch rated up to 30,000-lbs. There is also the Curt Ball and Safety Chain Loop Kit for Ram Underbed Gooseneck Hitch - 38K # C58CR which is rated for up to 38,000-lbs,... view full answer...
I have a few solutions for you, however, a gooseneck hitch and a fifth wheel hitch will not typically fit together on a truck. The frame brackets of the gooseneck hitch or fifth wheel hitch will interfere with the frame brackets from the other hitch. This would be the case on your truck if you tried to install the Reese Universal Fifth Wheel Install Kit, # RP30035, that you referenced. The frame brackets for your B and W gooseneck hitch will prevent the frame brackets from fifth wheel base... view full answer...
I may have a solution for you to use your factory gooseneck setup, but there is not an offset gooseneck ball like the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch # C602 designed to fit on the factory Ford prep package. With that said, you can eliminate the Andersen Ultimate # AM3200 and use the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter w / 8" Offset for Short-Bed Trucks # AM3139; this adapter connects directly to your 5th wheel kingpin and allows you to couple... view full answer...
In order to find the underbred installation brackets compatible with the gooseneck hitch you have, we will need to know the manufacturer of the gooseneck.
If the gooseneck you removed from another truck is the Curt Double Lock Gooseneck Hitch # C60607, you can use the Curt Custom installation kit # C60661 . Or, if you instead have the Curt EZr Double Lock Gooseneck Trailer Hitch # C60619 , you can use the Curt Custom Installation Kit # C60660.
If your existing gooseneck is not a Curt... view full answer...
The correct installation kit for a 2011 Chevy Silverado 2500 is # C60604. It will fit with the Curt Double Lock, Flip and Store gooseneck hitch; Curt Quick Goose 2 gooseneck hitch; or Curt Underbed, Folding gooseneck hitch. I have linked instructions for the installation kit. view full answer...
For your 2022 Ford F-350, I recommend going with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1116.
This kit is an under-bed gooseneck hitch kit that will allow you to remove the 2-5/16" hitch ball, and use a 5th wheel hitch like the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500.
This hitch will drop right into the gooseneck hitch ball hole and give you a fully functioning 5th wheel trailer hitch.
Additionally, I recommend... view full answer...
There is a way for you to use your standard Husky 5th wheel hitch with your B&W Turnoverball Underbed Gooseneck Hitch, though you wouldn't be able to add 5th wheel rails. That's because the brackets that allow you to mount 5th wheel rails mount in the same spot on your truck as the gooseneck hitch, so there isn't a way to mount both gooseneck rails and 5th wheel rails.
It would be like trying to wear tennis shoes and work boots at the same time, for example - there just isn't enough room... view full answer...
The best offset option available for your Toyota Tundra and your gooseneck trailer is the Draw-Tite Gooseneck Hitch Ball with 5 Inch Offset, # 19308, that you referenced. Gooseneck hitches were not designed to provide additional offset for gooseneck trailers and short bed trucks, but this offset ball will improve your turning clearance by approximately 10 degrees.
As you may have already determined, this ball will not allow you to safely make a 90 degree turn, but it will allow the best... view full answer...
I may have a solution for you, but there is not a taller gooseneck hitch ball that we have available for the B&W, or any other gooseneck hitch at this time. You might be able to get your gooseneck trailer connection away from the toolboxes using something like the 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches
# BWGNXA4085.
If you've got a different brand of gooseneck hitch, let me know and I can see if there is somethingt hat would work. I've also gone ahead and linked... view full answer...
I have a solution for you, however, the B&W Turnoverball King Pin Adapter, # BWGNXA4000, is designed to drop into a B&W Underbed Gooseneck Hitch, like # BWGNRK1197, and tow an inverted 5th wheel hitch.
In your case, if you are towing a gooseneck trailer with a 5th wheel hitch, your best option would be to use a Gooseneck-to-5th-Wheel Trailer Coupler, like # BD0289640300. Replacing the inner tube on the gooseneck with this adapter will allow you to connect the trailer to a 5th wheel hitch.... view full answer...
Yes, since you have a short bed truck, you are still going to need to concerned about clearance with your gooseneck trailer.
Without knowing what type of 5th wheel/gooseneck setup you have, I can't say for sure what you'll need, however if you have a set of industry standard base rails like the Curt Universal Fifth Wheel Base Rails with Installation Kit # C16200, you can use the:
-Curt Above-Bed Gooseneck Trailer Hitch for Fifth Wheel Rails # 16055.
This will help combat the clearance... view full answer...
You can measure from the center of your existing gooseneck ball to the back of the cab on the Dodge and then measure the width of the trailer loft and divide that by two. If the measurement from the center of the hitch ball to the cab is 4 inches greater than one half the width of the trailer you should have room for clearance. If not you will need to purchase an offset gooseneck ball that is long enough to provide the 4 inches clearance needed to accommodate pitch and roll of the trailer... view full answer...
Yes, The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500 will fit in a Ford and or Chevy but you will need The custom B&W Underbed Gooseneck Trailer hitch for each vehicle.
For example if you have a 2020 Ford F-250 Super Duty you would need The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1116 to use The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500.
If you have a 2020 Chevrolet Silverado 2500 you would need The B&W Turnoverball... view full answer...
I have a solution for you to add a gooseneck hitch, but there is not a product available that I'm aware of that will fit under the bed with the system you've mentioned.
I do believe you've got the Reese Elite Series underbed kit # RP30082 which was designed for Reese Elite and Signature series 5th wheel hitches. Since you have that, the Reese Elite Series Above-Bed Gooseneck Trailer Hitch - 25,000 lbs # RP30845 will drop into those pucks that you've got and allow you to tow a gooseneck... view full answer...
To add a gooseneck hitch to your 2006 Ram 2500 Laramie with the 6-1/2 Foot bed I recommend using the Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs # C60682. This gooseneck hitch installs under the bed so you'll have a clear truck bed when the ball is removed and it installs without any required drilling, so it's an easy to add option.
If you don't already have a 7 way plug in the truck bed for easy connection to your trailer, I recommend using... view full answer...
What you are looking for is the Replacement Mounting Hardware Kit for Curt 600 Series Gooseneck # C60652-BK.
This hardware fits the following:
- Curt Double Lock, Flip and Store Underbed Gooseneck Hitch # C60712
- Custom Underbed Installation Kit for Demco Recon 5th Wheel Trailer Hitch # C60712-5W
- Curt Underbed, Folding Gooseneck Trailer Hitch C61652-652
- Curt 600 Series Gooseneck Installation Kit for Chevy/GMC # C60652. view full answer...
Yes, per Curt the Curt Above-Bed Gooseneck Trailer Hitch # 16055 can be positioned over the axle or for a 3 inch rearward offset.
The gooseneck hitch has an offset hitch ball that provides additional space between your truck's cab and your gooseneck trailer.
The B&W Custom Installation Kit w/ Base Rails # BWRVK2605 are needed to attach the Curt Gooseneck hitch to.
I attached a review video link below. view full answer...
The correct gooseneck hitch and installation kit for the 2004 Titan Crew Cab with either a 5-1/2 or 6-1/2 foot bed is the Curt Double Lock, Flip and Store Gooseneck Hitch with Installation Kit, item # C620-664.
At this time, the Reese Hide-A-Goose Underbed Gooseneck Trailer Hitch, item # 9461, has not been fitted for use with the Nissan Titan trucks.
You may also be interested in the Fifth Wheel and Gooseneck 90 Degree Wiring Harness with 7-Pole Connector, item # 50-97-410, which will... view full answer...
It sounds like your 2020 Chevrolet Silverado 3500 already has a Gooseneck hitch installed, so the easiest way to adapt a standard 5th wheel trailer, is to use the:
- Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset # CAB-C5GX1216.
This adapter will bolt to your campers kingpin on your 5th wheel hitch, and will give you the ability to use your Gooseneck hitch.
This adapter also has a 7-1/2" offset, and has a towing capacity of 20,000-lbs.
Additionally, if you're also... view full answer...
Go To Results